BASE COCONUT SOAP!

The “basic part of the soap is neither superfated (extra oils) nor with essential oils. Here are two variations:

Lathering Skin Bar (20% superfat)
Makes approximately 44 oz. of soap.

Note: Because this soap is highly superfatted it can create a very dense lather when rubbed directly on skin. For a light, bubbly effect I recommend lathering with a natural sponge like this one.

• 33 oz coconut oil, 76 degree* (where to buy coconut oil)
• 4.83 ounces lye (NaOH)** (where to buy lye)
• 12.54 oz water
• .5 – 1 ounce essential oils (optional)
  
  Laundry Soap (1% superfat)

Makes approximately 44 oz. of soap.

• 33 oz coconut oil, 76 degree* (where to buy coconut oil)
• 5.9 ounces lye (NaOH)** (where to buy lye)
• 12 oz water
• .5 – 1 ounce lavender or other essential oils (optional) (where to buy lavender essential oil)
  

There are several types of coconut oil. Te most common has a melting point of

76 degrees. and it is the preferred type for soap making.

Note: According to Anne Watson, author of Smart Soapmaking, you can use your regular kitchen utensils as long as you follow these guidelines.
Lye is a naturally occurring substance that can be made by burning hardwoods and boiling the ashes, but it’s much easier to just buy.  You can buy NaOH (Natrium Hydroxide) which is the most easiest to find and makes a hard soap and soap bars and KOH (Kalium Hydroxide) which i use to buy on the internet and make a more liquid form of soap, which I use to make showergels, floor detergent and dishwasher!

Equipment:

• crock pot – 8 quart
• stick blender
• digital scale
• thermometer
• glass measuring cups
• small glass bowls
• plastic spoon with long handle (if you use a wooden spoon like the one pictured below, make sure not to use it for anything but soapmaking)
• rubber spatula
• sink or bowl filled with vinegar and water for cleaning anything that comes in contact with lye. Follow by cleaning with soap.
• protective equipment: long-sleeved shirt, plastic/rubber gloves, safety glasses or protective eye gear
• soap mold – (where to buy oval soap mold or square soap mold) A standard sized bread pan is perfect for this batch, cardboard boxes will also work
• parchment paper for lining the soap mold (where to buy parchment paper online)
  
  STEPS!

Step 1: Weigh your ingredients and set your crockpot to low

Step 2: Add water to a medium-sized glass or ceramic bowl and take it outside along with the lye and long-handled spoon. While wearing your protective gear and taking care not to breathe the vapors, slowly add the lye to the water while mixing gently. Order is important here, so make sure it is the lye you’re pouring into the water. The mixture will get very hot so be careful! Let it transition from cloudy to clear, then bring it inside. Let cool for 5-10 minutes while you work on step 3.

Step 3: Place coconut oil in a saucepan and heat to 120-130F. Make sure that your thermometer is not touching the bottom of the pot when taking your reading. (You can skip this step if you want to add your oil directly to the crockpot and wait for it to melt, but I prefer not to wait.)

Step 4: Place coconut oil in your crockpot and set to low.

Step 5: Add lye to crockpot (being careful not to splash) and stir a few times.

Step 6: Using the stick blender begin mixing toward “trace.” You’ll know trace is achieved when the mixture has the texture and thickness of a light pudding.

Step 7: Cover and let cook on low. During this process the oils should rise up the sides like a wave and then fold back into the mixture. Mine usually takes 45 minutes – 1 hour but the cooking time will vary depending on how hot your crock pot is. Check on it often. If it rises up the sides and seems like it might overflow just give it a quick stir and it will reduce in volume.

Step 8: When the soap is ready it should look a little like semi-translucent vaseline with no oil puddles in the middle. There are two ways to test and see if it’s done. First, dip a PH test strip and wait several minutes for it to fully change color. It should be between 7-10. If it is higher than 10 it’s not done. For a slightly less scientific approach, take a little of the soap and rub it between your fingers. It should feel a bit waxy. Now touch it to your tongue. If it ‘zaps’ you, it’s not done. Note: It is really important to make sure all the lye is converted – otherwise the finished soap can burn!

Step 9: If you’re adding essential oils, wait until the mixture cools a little and then add them, otherwise they will lose their fragrance. (I skipped this, so no photo!)

Step 10:  Spoon mixture into your mold and let cool. If you want to speed up this process put it in the fridge

Step 11: Unlike other bars which need to harden for 24 hours before being cut, coconut oil makes a very hard bar that will be difficult to cut if you let it dry too long. Cut as soon as it’s cool and firm.

Step 12: In an area with good air flow, place bars on a rack/tray with about an inch of space between them. Allow them to dry out and harden for another few days. Though you can try your first bar right away, it’s best to let them sit for 2-3 weeks to let the conditioning properties fully develop.

VIDEO:

Shelf Life

About 1 year when stored in a cool, dry place.

Buy me!
PRICE: 120 NOK/ Piece 600 NOK Block (ca 10 soaps)